Effect of Ball Milling on Magnetic Properties of Nb Substituted R2Fe16Nb1(R: Er and Gd) Alloys, B. K. Rai, S. R. Mishra, S. Kanhara,G. Ghosh, MRS Fall 2012

Preparation and photocatalytic activity study of p-CuO/n-ZnO Nanocomposites, Santosh Sapkota and S. R. Mishra, Materials Research Society, Boston, Nov 2011, MRS Spring 2012. Volume 1443 / 2012, DOI: http://dx.doi.org/10.1557/opl.2012.1438

Effect of Solvent Acids on Physical Properties and Cell Attachment to Chitosan Microsphere-based Scaffolds. Manning R, Mecwan M, Shepherd B, Nguyen D, Mishra S, Haggard W, Bumgardner J., Society For Biomaterials, Annual Meeting and Exposition. April 2011.

Core-shell CoFe₂O₄-ZnO reusable photocatalysts, A. Wilson, S. R. Mishra, B. K. Rai, Materials Research Society, Boston, Nov 2011, MRS F11-1406-z05-68. 

Mechanochemical synthesis of multiferroic YFe_1-xCr_xO₃, V. Mallagareddy, B. K. Rai, S. R. Mishra, R. Rong, J. P. Liu, Materials Research Society, Boston, Nov 2011 (Submitted)

Effect of Molecular Weight of Chitosan Degraded by Microwave Irradiation on Bone Tissue Engineering Applications, MM Mecwan, T Burkey, SR Mishra, WO Haggard, JD Bumgardner, Society of Biomaterials, 2010.

Mechanochemical synthesis of nanocrystalline YFeO3 and its magnetic properties, V. Malagareddy, S. R. Mishra, R. K. Gupta, K. Ghosh, E. Gunapala, and G. K. Marasinghe, 2010 MMM Conference, January 2010.

Synthesis and characterization of FeNi-polymer nanocomposite particles, S. K. Karna, S. R. Mishra, V. malagareddy, E. Gunapala, I. Dubenko, G. K. Marasinghe, and N. Ali, 2010 MMM Conference,January 2010.

Mechanochemical synthesis of Co3O4-CuO antiferromagnetic nanocomposite powder and its magnetic properties, S. K. Karna, S. R. Mishra, R. K. Gupta, K. Ghosh, E. Gunapala, and G. K. Marasinghe, 2010 MMM Conference, January 2010.

Effect of molecular weight of chitosan degraded by microwave irradiation on growth of osteoblasts in vitro, MM Mecwan, GE Rápalo1, HA Doty, PA Norowski1, SR Mishra, WO Haggard, JD Bumgardner., Soc. Biomaterials, San Anatnio, April 2009

A novel approach to synthesis and characterization of biocompatible ZnO nanoparticles, N. Nag, J. Doak, R. Gupta, S. Mishra, P. Kahol, K. Ghosh, K. Manivannan, MRS Fall 2008.

Magneto-transport properties of Gd-doped In2O3 thin films, R. K. Gupta, K. Ghosh, S. R. Mishra, and P. K. Kahol, MRS Fall 2007, Boston, Vol. 1032, I06-04 (2008) .

A study of high quality Al-doped ZnO thin films grown at low temperature by Pulsed Laser Deposition, R. K. Gupta, K. Ghosh, S. R. Mishra, and P. K. Kahol, MRS Fall 2007, Boston, Vol. 1035, L11-17 (2008).

Electrical and Optical Properties of High Mobility W-doped In2O3 thin films, R. K. Gupta, Ghosh, S. R. Mishra, and P. K. Kahol, MRS Fall 2007, Boston., Vol. 1030, G03-19 (2008) .

Magneto-transport properties of cobalt doped indium oxide dilute magnetic semiconductors, R. K. Gupta, N. Mamidi, K. Ghosh, S. R. Mishra, and P. K. Kahol, MRS Fall 2007, Boston, 1032-I10-01 (2007).

Effect of biological fluid absorption on the lamellar structure of UHMWPE, Scott, M. Andrew, Viano, Ann M, Mishra, Sanjay R, Haggard, Warren O., Orthopedic Research Socieity, Fall 2007

Novel Planer Microwave Circuit Applications and Characterization of Ni Nanowires , Ryan L. Marson, Bijoy K. Kuanr, and Sanjay R. Mishra, MRS Fall 2007 Boston, 1058-JJ03-06 (2008).

Growth Kinetics of Carbon Nanosphere using “green”techniques, Mathilda Doorley, S. R. Mishra, M. Laradji, Ram Gupta, and K. Ghosh, MRS Fall 2007, Boston, 1054-FF12-41 (2008).

Magneto-transport properties of non-magnetic doped (Zn,Mn)O dilute magnetic semiconductor, K. Ghosh, G. Mundada, S. Manchiraju, T. Kehl, C. Vera, R. J. Patel, D. Ishiaho, S. R. Mishra and P. Kahol, IEEE-Trans Magnetic Proceedings, CE-01, May, San Diego, (2006).

Transport properties of Half-metal-polymer composite”, J. Losby, S. R. Mishra, and K. Ghosh, IEEE-Trans Magnetic Proceedings, DW-12, May, San Diego, (2006).

Magnetic properties of exchanged biased nanocomposites FeNi-X(X=CuO, NiO, and CoO) prepared via ball milling”, S. R. Mishra, I. Dubenko, M. Khan, N. Ali, T. Young, M. Hasistha, and K. Marasinghe, IEEE-Trans Magnetic Proceedings, GV-12, May, San Diego, (2006).

Utilization of Coal Combustion Byproducts to Construct Temporary Road Barriers, Kumar, S., Mohanty, M., Mishra, S., Shin, S., and Adams, R., Fly Ash 2005, New Delhi, India Dec 04-07 (2005).

Half-Metal-Polymer Magnetoresistive Composite, , S. R. Mishra, K. Ghosh, J. Losby, and T. Kehl, IEEE-TransMag Proceeding, Nagoya, Japan, April (2005).

Magnetic Properties of Magnetically Soft Nanocomposite Co-SiO2 Prepared via Mechanical Milling, , S. R. Mishra, I. Dubenko, J. Losby, K. Marasinghe, M. Ali, and N. Ali,  IEEE-TransMag Proceeding, Nagoya, Japan, April (2004).

High Field Magnetoresistance and Hall effect in (Ga,Mn)As dilute Magnetic Semiconductor, K. Ghosh, M.D. Arif, T. Kehl, R. J. Patel, S. R. Mishra and J. G. Broerman, Magnetism and Magnetic Materials, FL (2004).

Magnetic and Transport Properties of Ferromagnetic-PEEK Polymer Nanocomposite Prepared via Ion-implantation, K. Ghosh, S. R. Mishra et al., Materials Research Society, Boston (2004).

High Field Magnetoresistance and Hall effect in (Ga,Mn)As dilute Magnetic Semiconductor, K. Ghosh, M.D. Arif, T. Kehl, R. J. Patel, S. R. Mishra and J. G. Broerman, Materials Research Society, Boston (2004).

Magnetotransport Properties of Compression Molded CrO2-Polyimide Composite, Mishra, Sanjay R; Ghosh, Kartik; Losby, Joe; Kehl, Ted, Accepted, Materials Research Society, Boston (2004).

Mechanical and Structural characterization of Bentonite-Bottom ash composite, S. Kumar, S. R. Mishra, ICCE-11, NC. (2004).

Effect of Sterilization Method on the Polymerization Kinetics of Acrylic  Bone Cement, G. Lewis, S. R. Mishra, and J. Losby, Society for Biomaterials, Australia. (2004).

Ultrasonic characterization of curing process in fly ash cement composite, S. R. Mishra, S. Kumar, T. Edwards, and B. Hoffmeister, p. 497, ICCE-10, New Orleans (2003).

Magnetic behavior of Mechanically Milled CuO, S. R. Mishra, J. Losby, I. Dubenko, N. Ali, and K. Marasinghe, p. 495, ICCE-10, New Orleans, (2003).

Magnetic behavior of FeNi-CoO Ferromagnetic-Antiferromagnetic nanocomposite, S. R. Mishra, J. Losby, I. Dubenko, N. Ali and K. Marasinghe, p.493, ICCE-10, New Orleans, (2003).

AFM and Nanoindentation characterization of human lamellar bone prepared by microtome sectioning and Mechanical polishing technique, Rho, J Y;Xu, J;Mishra, S. R ;Fan, Z, 49th Orthopedic Research Society (2003).

Structure-property relationship in radiation cross-linked UHWME prior to and following tensile loading, S. R. Mishra, G. Lewis, and A. Ray, Trans Society for Biomaterials, (2003).

Sterilization Effect on bulk and microstructural properties of UHMWPE, S. R. Mishra, M. S. Jahan, J. Durant, J. Moseley, A. Wagh, J. Y. Rho, and M. Hooper, Society for Biomaterials, (2003).

Thermal and structural studies of copper-based nanoparticles produced by sol-gel processing, Ann M. Viano, Sanjay R. Mishra, ICCE-9, San Diego, (2002).

An ESR study of antiferromagnetic ordering in bulk to nanoscale CuO powder, S. R. Mishra, J. Losby, R. Lloyd, T. Gheyi, and A. Viano, ICCE-9, San Diego, (2002).

Magnetic properties of nanocomposite iron nitride-alumina using high-energy ball milling, S. Mishra, G. Long, F. Grandjean et. al, ICCE-9, San Diego, (2002).

Magnetic properties of iron nitride-alumina nanocomposite materials prepared by high-energy ball milling, S. R. Mishra, Gary J. Long, F. Grandjean, R. P. Hermann, S. Roy, N. Ali, A. Viano, ISSPIC, Stratsbourg, France (2002).

Nanoindentation and Magneto-Optical Study of Oxidized Co Thin Films, S. R. Mishra, J. Rho, G. Sherfy, M. Roy, and T. Buckner, Materials Research Society 695, 151-158 (2002).

Determination of UHMWPE Wear Particle Volume Using Atomic Force Microscopy", M. Morrison, M. Scott, S. R. Mishra, S. Jani, Trans Society for Biomaterials, p. 296, (2002).

Thermal and Structural Characterization of Nanocomposite Iron Nitride-Alumina and Iron Nitride-Silica Particles, Ann M. Viano and Sanjay R. Mishra, Materials Research Society 2001 V9.16, (2002).

A method to quantify wear particle volume using atomic force microscopy," Scott M, Morrison M, Jani S, and Mishra SR, Transactions of the 48th Orthopaedic Research Society, p. 132, (2002).

Preliminary Results from a New Spin Spectrometer, J.G. Tobin P. J. Bedrossian, T. R. Cummins, G. D. Waddill, S. R. Mishra, P. Larson, R. Negri, M. Miller, E. Peterson, P. Boyd and R. F. Gunion, Materials Research Society. Proc. 524, 185 (1998).

Evidence for the Photoemission Nature of Gd 4f Resonant Photoemission, S.R.  Mishra, T. R. Cummins, W. J. Gammon, G. D. Waddill,  G. van der Laan, K. W. Goodman, and  J.G. Tobin, Materials Research Society, Proc. 524, 197 (1998).